ALI M

ALI M. MEMARI, Ph.D., P.E., F.ASCE, Professor

Bernard and Henrietta Hankin Chair in Residential Building Construction

Director, Pennsylvania Housing Research Center (PHRC)

Editor-in-Chief, ASCE Journal of Architectural Engineering (JAE)

Department of Architectural Engineering, Department of Civil and Environmental Engineering, The Pennsylvania State University, 219 Sackett Building, University Park, PA 16802-1416, Phone: (814) 863-9788, Fax: (814) 863-7304, E-mail: amm7@psu.edu

The Pennsylvania Housing Research Center; Architectural Engineering Department Web Site; Civil and Environmental Engineering Department Web Site

CURRENT AREAS OF RESEARCH INTEREST:

·       Single-Family and Multi-Family Building Design and Construction

·       Multi-story Modular Construction of Residential Buildings

·       Analytical and Experimental Evaluation of Innovative Wall and Envelope Systems for Residential and Commercial Building Systems

·       Experimental Testing and Analytical Evaluation of Masonry, Mass Timber, and Light-frame Wall Systems for Residential and Commercial Buildings

·       Evaluation of Glazing and Envelope Systems for Energy Performance

·       Sustainable Building Structural and Envelope Systems and Construction Materials

·       Evaluation of Building Envelope System Components under Natural Hazard and Environmental Load Effects

·       Structural and Seismic Testing and Evaluation of Building Nonstructural and Structural Components

·       Additive Construction -- 3D Printing of Concrete

CURRENT TEACHING:

· AE/CE 542 – Building Enclosure Science and Design

· AE/CE 538 – Earthquake Resistant Design of Buildings

GRADUATE STUDENTS, THESIS TITLES AND GRADUATION DATES (2000 to present):

· Rupesh Yadav, Evaluation of the Performance of CLT Tornado Shelters, M.S. Thesis (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, May 2022.

· Mehrshad Amini, CFD-Based Probabilistic Framework for Evaluation of Coastal Residential Buildings under Combined Hurricane Wind and Surge Flood, Ph.D. Dissertation (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, August 2021.

· Amnah Alqenaee, Development of a Straw Reinforced Clay-Based Mixture for 3D Printing Construction of Affordable Home, M.S. Thesis (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, May 2021.

· Keunhyoung Park, Structural Considerations in Additive Manufacturing of Concrete as Part of NASA’s Centennial 3D Printed Mars Habitat Challenge, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, August 2020.

· Mehrzad Zahabi, Cold Sintered Calcium Carbonate Binders and Affinity Examination of 1D/2D Graphitic and Silica Nanoparticles in Civil Cementitious Materials, Ph.D. Dissertation (AMM Co-Advisor), Department of Architectural Engineering, Penn State University, University Park, May 2020.

· Xinrui Lu, Application of Infrared Thermography on the In-situ Measurement of Building Envelope Thermal Properties, Ph.D. Dissertation (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, August 2019.

· Yingzhe You, Methodology for Hurricane Damage to glazing Systems toward Probabilistic Loss Estimation, M.S. Thesis (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, December 2017.

· Ehsan Kamel, Integration and Interoperability of Building Envelope Information and Energy Modeling, Ph.D. Dissertation (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, August 2017.

· Thaison Nguyen, Structural, Building Science, Sustainability, and Constructability Study of a Transparent Residential Wall System, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, August 2016.

· Zhu, Yizhi, Development of Fragility Information for Building Light-frame and Envelope Systems for Performance-Based Seismic Design, M.S. Thesis (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, December 2016.

· Ramaji, Issa, An Integrated Building Information Modeling (BIM) Framework for Multi-story Modular Buildings, Ph.D. Dissertation, (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, May 2016.

· Jellen, Anthony C., Vertical Expansion of Existing Buildings Using Volumetric Modular Construction, M.S. Thesis (AMM Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, August 2015.

· Nasser, Ramsey, Seismic Design Guide for Glazing Systems, M. Eng. Report (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2014.

· Ariosto, Timothy M., Evaluation of the Energy Performance of Glazing Systems and Fenestration Retrofit Solutions, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2013.

· Thiede, Jennifer, Review and Preliminary Evaluation of Weather Resistive Barriers under Earthquake Induced Building Drift, M. Eng. Report (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2012.

· Hott, Zed Z., Development of Composite Monolithic Glass with Micro-Lamella to Control Solar Heat Gain though Glazing for Energy Efficiency, M. Eng. Report (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2012.

· Simmons, Nicholas C., Analytical Evaluation of the Racking Performance of Four-Sided Structural Silicone Glazing Curtain Wall Systems, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2011.

· Ota, Hiroki., Experimental Study of Mortarless Post-Tensioned Masonry Walls and Development of Design Guidelines, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, August 2011.

· Stallworth, Harold L., Flexural Behavior of a Reinforced Brick Veneer over Steel Studs Wall Panel System, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2011.

· Grossenbacher, Steve V., Comparative Evaluation of Structural and Water Penetration Performance of Sustainable Masonry Walls, M. Eng. Report (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2011.

· Shoemaker, Jared M., Acceleration Response of Rigid and Flexible Nonstructural Components in Buildings Subjected to Strong Ground Motions, M.S. Thesis (AMM Co-Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2010.

· Donovan, Luke T., Quantification of Seismic Performance Factors for Structural Insulated Panel Shear Walls, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2010.

· Hartman, Kenrick J., Analytical and Experimental Development of Performance-Based Seismic Design Methods for Storefront and Unitized Wall Systems, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2010.

· Kauffman, Andrew L., Cyclic In-plane Lateral Load Testing of Masonry Infill Walls with Structural Fuse Elements, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2009.

· Kuczynski, Thomas C, Experimental Investigation of Multihazard Resistant Panelized Brick Veneer on Steel Stud Wall System for Out-of-Plane Failure Loading, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2009.

· Standley, Joseph A., Development of a Transparent Sustainable Wall System with Load Bearing Backup Framing for Residential Construction, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, December 2009.

· O’Brien, William C., Development of a Closed-form Equation and Fragility Curves for Performance-Based Seismic Design of Glass Curtain Wall and Storefront Systems, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2009.

· Terentiuk, Stefanie, Parametric Study of Structural Insulated Panels Under Monotonic and Cyclic Loading, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2009.

· Maneetes, Hathairat, Development of a Seismic Dissipating Mechanism for Precast Concrete Cladding Panels, Ph.D. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2007.

· Liang, Jianhai, Development of Seismic Infill Resistant Panelized Brick Veneer Wall Systems, Ph.D. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, August 2006.

· Aliaari, Mohammad, Development of Seismic Infill Wall Isolator Subframe (SIWIS) System, Ph.D. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2005.

· Shirazi, Ali, Development of a Seismic Vulnerability Evaluation Procedure for Architectural Glass Curtain Walls, Ph.D. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2005.

· Chen, Xuezhen, Seismic Performance of Two-Sided SSG Arch Glass Curtain Walls, M.S. Thesis (AMM Co-Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2005.

· Astarlioglu, Serdar, Object Oriented Platform for Seismic Analysis of Precast Concrete Buildings, Ph.D. Thesis (AMM Co-Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, PA, December 2005.

· Eminaga, Ayca, External Flexural Strengthening of Autoclaved Aerated Concrete Lintels by Sheet-Bonded Fiber Reinforced Polymers, M.S. Thesis (AMM Advisor), Department of Architectural Engineering, Penn State University, University Park, PA, May 2003.

· Chendana, Jimmy, Seismic Performance of R/C Columns, M.S. Thesis (AMM Co-Advisor), Department of Civil and Environmental Engineering, Penn State University, University Park, PA, December 2003.

PATENTS:

· Title: “Earthquake Damage Resistant Glass Panel”

Inventors: Ali M. Memari, Paul A. Kremer and Richard A. Behr

U.S. Patent No.: US 8,539,725 B2

Date of Patent: September 24, 2013

PSU Invention Disclosure No. 2487

· Title: “Transparent Sustainable Wall System”

Inventors: Ali M. Memari and Joseph A. Standley

U.S. Patent No.: US 8,833,012 B2

Date Patent Issued: September 16, 2014

PSU Invention Disclosure No. 3427

SELECTED PUBLICATIONS (2000 to present):

A. Refereed Journals

· Bello, N. and Memari, A. M., (2023). “Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies,” MDPI Buildings, Special Issue on Advances in Additive Manufacturing and Construction 4.0, Published 12/31/22, Vol. 13, No. 106, 33p., https://doi.org/10.3390/ buildings13010106.

· Moeini, M. and Memari, A. M., (2023). “Review of Hurricane-Induced Failure Mechanisms in Low-Rise Residential Buildings: Knowledge Gaps and Future Directions,” ASCE Natural Hazard Review, Published online 1/12/23; Vol. 24, No. 2, May 2023, 23p; https://doi.org/10.1061/NHREFO.NHENG-1544. DOI: 10.1061/NHREFO.NHENG-1544.

· Memari, A. M., Solnosky, R., and Hu, C., (2022). “Multi-Disciplinary characteristics of Double-Skin Facades for Computational Modeling Perspective and Practical Design,” MPDI Buildings Special Issue on Advanced Residential and Commercial Building Envelope Systems Evaluation, Published 9/30/22, Vol. 12, 1576, 33p., https://doi.org/10.3390/buildings12101576.

· Kamel, E., and Memari, A. M., (2022). “Residential Building Envelope Energy Retrofit: Methods, Simulation Tools, and Example Projects: A Review of the Literature,” MPDI Buildings, Special Issue Advanced Residential and Commercial Building Envelope Systems Evaluation, Vol. 12, No. 7, 954; Published July 5, 2022, https://doi.org/10.3390/buildings12070954.

· Hojati, M., Memari, A. M., Wu, Z., Li, Z., Zahabi, M., Park, K., Nazarian, S., and Duarte, J. P., (2022). “Barbed-Wire Reinforcement for 3D Concrete Printing,” Elsevier Automation in Construction, Vol. 141, 12p., Published September 2022, 104438, https://doi.org/10.1016/j.autcon.2022.104438.

· Hojati, M., Li, Z., Memari, A. M., Park, K., Zahabi, M., Nazarian, S., Duarte, J. P., and Radlinska, A., (2022). “3D-printable quaternary cementitious materials towards sustainable development: Mixture design and mechanical properties,” Elsevier Results in Engineering Journal, Published March 2022, Vol. 13, 10p. https://doi.org/10.1016/j.rineng.2022.100341.

· Lu, X. and Memari, A. M., (2022). “Comparison of the Experimental Measurement Methods for Building Envelope Thermal Transmittance, MDPI Buildings, published 03/01/2022, Vol. 12, No. 3, 15p., https://doi.org/10.3390/buildings12030282.

· Al-Qenaee, A. and Memari, A. M., (2022). “Experimental Study of 3D Printable Cob Mixtures, Elsevier Journal of Construction and Building Materials, published 02/09/22, Vol. 324, 126574, 19p. https://doi.org/10.1016/j.conbuildmat.2022.126574.

· Wu, Z., Memari, A. M., and Duarte, J. P., (2022). “State of the Art Review of Reinforcement Strategies and Technologies for 3D Printing of Concrete,” MDPI Energies, Published 01/04/2022, Vol. 15 (1), 360, 24 pages; https://doi.org/10.3390/en15010360.

· Amini, M., and Memari, A. M., (2021). “LES Simulations of Wind-induced Pressure on the Floor System Underside of Elevated Buildings, Techno Press International Journal of Wind and Structures, Published 11/5/21, Vol. 33, No. 5, November 2021, pp. 397-407. DOI: https://doi.org/10.12989/was.2021.33.5.397.

· Memari, A. M., Simmons, N. C. and Solnosky, R., (2021). “Derivation of Kinematic Equations Based on Full-scale Racking Tests for Seismic Performance Evaluation of Unitized Four-sided Structural Sealant Glazing Curtain Wall Systems,” MDPI Buildings, Published 11/28/21, Vol. 11, 593, 23p. https://doi.org/10.3390/buildings11120593.

· Memari, A. M., Simmons, N. C. and Solnosky, R., (2021). “Developing FEM Procedures for Four-Sided Structural Sealant Glazing Curtain Wall Systems with Reentrant Corners,” MDPI Buildings, Published 11/29/21. Vol. 11, 597, 30p. https://doi.org/10.3390/buildings11120597.

· Duarte, G., Duarte, J. P., Memari, A. M., and Brown, N., (2021). “Learning from Historical Structures under Compression for Concrete 3D Printing Construction,” Elsevier Journal of Building Engineering, Published 7/24/21, Vol. 43, 103009, pp. 1-19; https://doi.org/10.1016/j.jobe.2021.103009.

· Al-Qenaee, A., Memari, A. M., and Hojati, M., (2021). “Transition from Traditional Cob to 3D Printing of Clay Homes,” Journal of Green Building, Vol. 16, No. 4., pp. 3-28. DOI:10.3992/jgb.16.4.3.

· Amini, M. and Memari, A. M., (2021). “Comparative Review and Assessment of Various Flood Retrofit Methods for Low-Rise Residential Buildings in Coastal Areas,” ASCE Natural Hazards Review, Published online 3/19/21; Vol. 22, No. 3, August 2021, pp. 04021009-1-21; DOI: 10.1061/(ASCE)NH.1527-6996.0000464.

· Amini, M. and Memari, A. M., (2021). “CFD-Based Evaluation of Elevated Coastal Residential Buildings under Hurricane Wind Loads,” ASCE Journal of Architectural Engineering, Published Vol. 27, No. 3, pp. 04021014-1-19. DOI: 10.1061/ (ASCE)AE.1943-5568.0000472.

· Memari, A. M., Simmons, N. C., and Solnosky, R., (2021). “Unitized Curtain wall Systems Joint Performance with Re-entrant Corners under Seismic Racking Testing,” Elsevier Journal of Building Engineering, Published 5/27/21; Vol. 40, August 2021, 18p. https://doi.org/10.1016/j.jobe.2021.102715.

· Zuabi, W. and Memari, A. M., (2021). “Review of Hempcrete as a Sustainable Building Material,” International Journal of Architecture, Engineering and Construction, published January 2021; Vol. 10, No. 1, pp. 1-17, DOI: http://dx.doi.org/10.7492/IJAEC.2021.004.

· Zahabi, M., Said, A., and Memari, A.M., (2021). “Cold Sintering of Calcium Carbonate for Construction Materials Application,” American Chemical Society Journal of ACS Omega,13p.; https://doi.org/10.1021/acsomega.0c04617.

· Li, Z., Hojati, M., Piasente, J., Ashrafi, N., Duarte, J. P., Nazarian, S., Bilen, S., Memari, A., and Radlinska, A. (2020). “Fresh and Hardened Properties of Extrusion-Based 3D-Printed Cementitious Materials: A Review,” MDPI Sustainability, Vol. 12, No. 14, 5628, 33p. https://doi.org/10.3390/su12145628.

· Amini, M.* and Memari, A. M., (2020). “Review of Literature on Performance of Coastal Residential Buildings under Hurricane Conditions and Lessons Learned,” ASCE Journal of Performance of Constructed Facilities, Published Vol. 34, No. 6, pp. 04020102-1-26. Published online August 19, 2020; DOI: 10.1061/(ASCE)CF.1943-5509.0001509; ORCID: https://orcid.org/0000-0003-1000-7129.

· Lu, X. and Memari, A. M., (2020). “Evaluation of Selected Dynamic Models in Comparison with Hot Box Test Results for Measurement of Building Envelope Thermal Properties,” Journal of Green Building, Published July 2020, Vol. 15, No. 2, pp. 29-43. https://doi.org/10.3992/1943-4618.15.2.29.

· Ramaji, I. J. and Memari, A. M., (2020). “Interpreted Information Exchange: Implementation Point of View,” Journal of Information Technology in Construction, Published February 2020; ITcon Vol. 25 (2020), pp. 123-139. https://dx.doi.org/10.36680/j.itcon.2020.008.

· Habibi, S., Obonyo, E., and Memari, A. M., (2019). “Design and Development of Energy Efficient Re-roofing Solutions,” Submitted to Elsevier Renewable Energies, October 20, 2019, Accepted December 23, 2019, 11p. Published online November 2019: https://doi.org/10.1016/j.renene.2019.11.128.

· Lu, X. and Memari, A. M., (2019). “Comparative Study of Indoor Infrared Thermography Method to Estimate the Overall Thermal Resistance for Building Envelope Systems,” International Journal of Architectural Engineering and Construction, Vol. 8, No. 3, September 2019, pp. 14-21. http://dx.doi.org/10.7492/IJAEC.2019.014.

· Hindman, D. P. and Memari, A. M., (2019). “Mass Customized Cross-Laminated Timber Elements for Building Construction,” Forest Product Society, Wood Design Focus, Volume 29, No. 2, Summer 2019, pp. 27-34.

· Memari, A. M., Iulo, L. D., and Griffin, C., (2019). “Study of Vulnerability of Air Barrier Membranes and Sealant Joint Tapes Applied over Wood Sheathing Panel Joints Due to Racking Movement in Passive House Designed Residential Buildings,” Forest Product Society, Wood Design Focus, Vol. 29, No. 1, Spring 2019, pp. 10-17.

· Lu, X. and Memari, A. M., (2019). “Application of Infrared Thermography on In-Situ Determination of Building Envelope Thermal Properties,” Elsevier Journal of Building Engineering, Vol. 26, November 2019, 100885, pp. 1-12; https://doi.org/10.1016/j.jobe.2019.100885.

· Ariosto, T., Memari, A., and Solnosky, R. (2018). “A Comparative Thermal Properties Analysis Evaluation for Residential Window Retrofit Solutions for U.S. Markets,” Taylor and Francis, Advances in Building Energy Research, Published online October 19, 2018, 30p.; DOI: 10.1080/17512549.2018.1528885.

· Lu, X. and Memari, A. M., (2019). “Comparative Analysis of Energy Performance for residential wall systems with conventional and innovative insulation materials: A Case Study,” Open Journal of Civil Engineering, Vol. 9, No. 3, September 2019, pp. 240-254. DOI: 10.4236/ojce.2019.93017; https://www.scirp.org/Journal/paperinformation.aspx?paperid=95034.

· Lu, X. and Memari, A. M., (2019). “Evaluation of Selected Dynamic Models in Comparison with Hot Box Test Results for Measurement of Building Envelope Thermal Properties,” Journal of Green Building, In Press.

· Lu, X. and Memari, A. M., (2019). “Comparative Energy Analysis and Life Cycle Assessment of innovative Residential Wall Systems,” ASCE Practice Periodical on Structural Design and Construction, Published 5-7-19; Vol. 24, No. 3, pp. 04019015-1 to 04019015-17. https://ascelibrary.org/doi/full/10.1061/(ASCE)SC.1943-5576.0000432.

· Lu, X. and Memari, A. M., (2019). “Performance Evaluation of Wall Panels Incorporating Conventional and Innovative Materials Developed with High Insulation Properties,” International Journal of Architectural Engineering and Construction, Vol. 8, No. 1, March 2019, pp. 1-8.

· Lu, X. and Memari, A. M., (2019). “Determination of Exterior Convective Heat Transfer Coefficient for Low-Rise Residential Buildings,” Taylor and Francis Journal of Advances in Building Energy Research, Published online May 6, 2019, 19p; DOI: 10.1080/17512549.2019.1612468.

· Ariosto, T., Memari, A. M., and Solnosky, R. L., (2019). “A Comparative Energy Efficiency Study of Different Glazing Systems in Residential and Commercial Building Applications,” International Journal of Architectural Engineering and Construction, Vol. 8, No. 2, June 2019, pp. 1-18.

· Memari, A. M., Simmons, N. C., and Solnosky, R., (2018). “Video Capture Technique Analysis of Four-Sided Structural Sealant Glazing Curtain Wall Systems for Racking Performance,” Submitted to International Journal of Architectural Engineering and Construction, In Press.

· Ariosto, T., Memari, A. M., and Solnosky, R. L., (2018). “Development of Designer Aids for Energy Efficient Residential Window Retrofit Solutions,” Elsevier, Sustainable Energy Technologies and Assessments, Vol. 33, pp. 1-13; https://authors.elsevier.com/c/1YgyE_oKYdJtFN.

· Kamel, E. and Memari, A. M., (2019). “Review of BIM’s Application in Building Energy Simulation: Tools, Issues, and Solutions,” Elsevier Journal of Automation in Construction,” Vol. 97, pp. 164-180. DOI: 10.1016/j.autcon.2018.11.008.

· Kamel, E., and Memari, A. M., (2019). “State of the Art Review of Energy Smart Homes,” ASCE Journal of Architectural Engineering, Special Section on Housing and Residential Building Construction, Vol. 25, No. 1, March 2019, pp. 03118001-1-26. DOI:10.1061/(ASCE)AE.1943-5568.0000337; https://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29AE.1943-5568.0000337.

· Kamel, E. and Memari, A. M., (2017). “BEPAT: A Platform for Building Energy Assessment in Energy Smart Homes and Design Optimization,” Techno Press Advances in Energy Research, Published February 2018; Vol. 5, No. 4, pp. 321-339; DOI: http://doi.org/10.12989/eri.2017.5.4.321.

· Lu, X. and Memari, A. M., (2018). “Comparative Study of Hot Box Test Method Using Laboratory Evaluation of Thermal Properties of a Given Building Envelope System Type,” Elsevier Journal of Energy and Buildings, 178, November 2018, pp.130-139, DOI:

https://doi.org/10.1016/j.enbuild.2018.08.044.

· Ramaji, I. J. and Memari, A. M., (2018). “Extending the Current Model View Standards to Support Multi-Story Modular Building Projects,” Taylor & Francis Architectural Engineering and Design Management, Vol. 14, Issue 1-2, pp. 158-176; DOI: 10.1080/17452007.2017.1386083.

· Memari, A. M., Kremer, P. A., Solnosky, R., and Hartman, K., (2018) “Racking Test Evaluation of Unitized Curtain Wall System with Structural Glazing Tape,” ASCE Journal of Architectural Engineering, Vol. 24, No. 2, June 2018, pp. 04018006 (1-25).

· Jellen, A. and Memari, A.M., (2018). “Improving Project Feasibility - Modular Construction Methods for Residential Vertical Expansion of Existing Buildings”, ASCE Journal of Architectural Engineering, Special Section on Housing and Residential Building Construction, Vol. 24, No. 3, September 2018, pp. 04018019(1-12). https://ascelibrary.org/doi/abs/10.1061/(ASCE)AE.1943-5568.0000322.

· Ramaji, I. J. and Memari, A. M., (2018). “Interpretation of Structural Analytical Model from the Coordination View in Building Information Models,” Elsevier Automation in Construction, Vol. 90, June 2018, pp. 117-133. https://doi.org/10.1016/j.autcon.2018.02.025.

· Kamel, E. and Memari, A. M., (2018). “Automated Building Energy Modeling and Assessment tool (ABEMAT),” Elsevier Journal of Energy, Vol. 147, March 15, 2018, pp. 15-24, https://doi.org/10.1016/j.energy.2018.01.023;

https://www.sciencedirect.com/science/article/pii/S036054421830029X.

· Zahmatkesh, F. and Memari, A. M., (2017). “Review of Conventional and Innovative Technologies for Fire Retrofitting of Existing Buildings,” Scientific Research Open Journal of Civil Engineering, Vol. 7, No. 2, pp. 222-244; DOI: 10.4236/ojce.2017.72014, June 7, 2017.

· Yiang, X. and Memari, A. M., (2017). “Comparative Study on Energy Performance of Common Commercial Building Wall Systems,” Springer International Journal of Architecture, Engineering and Construction, Vol. 6, No. 2, June 2017, pp. 1-11. http://www.iasdm.org/journals/index.php/ijaec/article/viewFile/427/286.pdf

· Ramaji, I. J., Memari, A. M., and Messner, J. I., (2017). “A Product-Oriented Information Delivery Framework for Multi-Story Modular Building Projects,” ASCE Journal of Computing in Civil Engineering, Published online 1/23/17, pp. 04017001-1-17.

· Memari, A. M., Kuczynski, T. C. and Solnosky, R., (2018). “Review of Design, Construction, and Capabilities of an Air Bladder Load Test Facility (ABLTF) for Structural Experimental Enclosure Studies,” ASTM Journal of Testing and Evaluation, Vol. 46, No. 4, July 2018, pp. 1421-1433.

· Leung, M.-Y., Yu, J., and Memari, A., (2016). “Managing Indoor Facilities in Public Housing to Improve Elderly Quality of Life,” International Journal for Housing Science, Vol. 40, No. 2, pp. 85-98.

· Ramaji, I. J. and Memari, A. M., (2016). “Product Architecture Model for Multi-story Modular Buildings,” ASCE Journal of Construction Engineering and Management, Published online April 1, 2016, pp. 04016047-1-14, http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29CO.1943-7862.0001159.

· Ramaji, I. J. and Memari, A. M., (2016). “Interpreted Information Exchange: A Systematic Approach for BIM to Engineering Analysis Information Transformations,” ASCE Journal of Computing in Civil Engineering, Published online April 20, 2016, pp. 04016028-1-17, http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29CP.1943-5487.0000591.

· Memari, A. M., Solnosky, R. L., and Stallworth, H. (2016). “Experimental Flexural Behavior of a Panelized Reinforced Brick Veneer with FRP Reinforcing on Steel Studs Wall System,” ASCE Practice Periodical on Structural Design and Construction, Published online on March 3, 2016, pp. 04016011 (1-17), http://dx.doi.org/10.1061/(ASCE)SC.1943-5576.0000278.

· Memari, A. M., Solnosky, R., and Mukherjee, M., (2015). “Comparative Study of Various Wall Systems Performance Attributes in Different Environmental Conditions,” International Journal of Architecture, Engineering, and Construction, Vol. 4, No. 2, June 2015, pp. 64-79.

· Memari, A. M., Huelman, P. H., Iulo, L. D., Laquatra, J., Martin, C., Andrew McCoy, A. P., Nahmens, I., and Williamson, T., (2014). “Residential Building Construction -- State-of-the-Art Review,” ASCE Journal of Architectural Engineering, Vol. 20, No. 4, Special Section: Housing and Residential Building Construction, pp. B4014005-1 to B4014005-38, http://dx.doi.org/10.1061/(ASCE)AE.1943-5568.0000157.

· Memari, A. M., Solnosky, R. L., Tufano, J, and Dillen, M., (2014). “Comparative Study on Multi-hazard Resistance and Embodied Energy of Different Residential Building Wall Systems,” Journal of Civil Engineering and Architecture Research, Vol. 1, No. 6, pp. 367-387.

· Memari, A. M., Shirazi, A., Kremer, P. A., and Behr, R. A., (2014). “Seismic Vulnerability Evaluation of Architectural Glass in Curtain Walls”, Journal of Civil Engineering and Architecture Research, Vol. 1, No. 2, pp. 110-128.

· Donovan, L. T. and Memari, A. M. (2014). “Feasibility Study of Determination of Seismic Performance Factors for Structural Insulated Panels,” ASCE Journal of Architectural Engineering, Vol. 21, No. 2, B4014007(1-13); DOI: http://dx.doi.org/10.1061/(ASCE)AE.1943-5568.0000163, Online publication Date: October 30, 2014.

· O’Brien, W. C. and Memari, A. M., (2014). “Prediction of Seismic Cracking Capacity of Glazing Systems,” Earthquakes and Structures Journal, Vol. 8, No. 1, pp. 101-132, DOI: http://dx.doi.org/10.12989/eas.2015.8.1.101.

· Standley, J. A. and Memari, A. M., (2014). “Evaluation of a Transparent Wall System for Residential Construction,” The Open Civil Engineering Journal, Vol. 8, pp. 143-153, DOI: 10.2174/1874149501408010143.

· Kauffman, A. L. and Memari, A. M., (2014). “Performance Evaluation of Different Masonry Infill Walls with Structural Fuse Elements Based on In-Plane Cyclic Load Testing,” Buildings, Vol. 4, pp. 605-634, doi:10.3390/buildings4040605.

· Terentiuk, S. and Memari, A. M., (2014). “Seismic Evaluation of Structural Insulated Panels in Comparison with Woodframe Panels,” Buildings, Vol. 4, pp. 394-417, doi:10.3390/buildings4030394.

· Maneetes, H. and Memari, A. M., (2014). “Introduction of an Innovative Cladding Panel System for Multi-Story Buildings,” Buildings, Vol. 4, pp. 418-436, doi: 10.3390/buildings4030418.

· Memari, A. M., Iulo, L. D., Solnosky, R. L., and Stultz, C. R., (2014). “Building Integrated Photovoltaic Systems for Single Family Dwellings: Innovation Concepts,” Open Civil Engineering Journal, Vol. 4, pp. 102-119, DOI:10.4236/ojce.2014.42010.

· Memari, A. and Solnosky, R. (2014). “In-Plane Shear Performance of Wood-Framed Drywall Sheathing Wall Systems under Cyclic Racking Loading” Open Journal of Civil Engineering, Vol. 4, No. 1, pp. 54-70, March 19, 2014, DOI: 10.4236/ojce.2014.41006.

· Vu, B., Unal, M., Warn, G. P., and Memari, A. M., (2013). “A Distributed Flexibility and Damping Strategy to Control Vertical Accelerations in Base-isolated Buildings,” Journal of Structural Control and Health Monitoring, DOI: 10.1002/stc.1580, pp. 1-19.

· Memari, A. M., Kremer, P. A., and Behr, R. A., (2012). “Seismic Performance of Stick-Built Four-Side Structural Sealant Glazing Systems and Comparison with Two-Side Structural Sealant Glazing and Dry-Glazed Systems,” Journal of ASTM International (JAI), Vol. 1, No. 1, July 2012, pp. 1-22, DOI: 10.1520/ACEM103159.

· Standley, J. A. and Memari, A. M., (2012). “Structural Assessment of a Transparent Sustainable Wall Panel with Load-Bearing Backup Framing for Residential Construction,” ASCE Journal of Architectural Engineering, Vol. 18, No. 4, December 2012, pp. 298-314.

· Aliaari, M. and Memari, A. M., (2012). “Development of a Seismic Design Approach for Infill Walls Equipped with Structural Fuse,” The Open Civil Engineering Journal, Vol. 6, December 2012, pp. 249-263, DOI: 10.2174/1874149501206010249.

· Kuczynski, T. C. and Memari, A. M., (2012). “Experimental Evaluation of the Enhanced Panelized Brick Veneer over Steel Stud Wall System for Out-of-plane Loading,” Materials and Structures Journal, August 2012, pp. 1-18, DOI 10.1617/s11527-012-9930-2.

· Lepage, A., Shoemaker, J. M., and Memari, A. M., (2012). “Accelerations of Nonstructural Components during Nonlinear Seismic Response of Multistory Structures,” ASCE Journal of Architectural Engineering, Vol. 18, No. 4, December 2012, pp. 285-297.

· Liang, J., and Memari, A. M., (2012). “Performance of a Panelized Brick Veneer Wall System under Lateral Loads,” Open Journal of Civil Engineering (OJCE), Vol. 2, No. 3, September 2012, pp. 132-146, DOI:10.4236/OJCE 2012.23019.

· O’Brien, W. C., Memari, A. M., Kremer, P. A., and Behr, R. A. (2012). “Fragility Curves for Architectural Glass in Stick-Built Glazing Systems,” Earthquake Spectra, Volume 2, No. 28, May 2012, pp. 639-665.

· Terentiuk, S. and Memari, A. M., (2012). “Seismic Evaluation of Structural Insulated Panels through Full-Scale Racking Load Testing,” Journal of Architectural Engineering, Vol. 18, No. 4, December 2012, pp. 261-275.

· Memari, A. M., Fisher, S., Krumenacker, C., Broker, K. A., and Modrich, R.-U., (2012). “Evaluation of the Structural Sealant for Use in Four-Sided Structural Sealant Glazing Curtain Wall System for a Hospital Building,” Journal of ASTM International (JAI), Vol. 9, Issue 4, April 2012, pp. 1-16, DOI: 10.1520/JAI104143.

· Broker, K. A., Fisher, S., and Memari, A. M., (2012). “Seismic Racking Test Evaluation of Silicone Used in a Four-Sided Structural Sealant Glazed Curtain Wall System,” Journal of ASTM International (JAI), Vol. 9, No. 3, March 2012, pp. 1-22, DOI: 10.1520/JAI104144.

· Memari, A. M. and Donovan, L. T., (2012). “Feasibility Study to Quantify Seismic Performance Factors for Structural Insulated Panels Based on FEMA P695 Methodology,” Wood Design Focus, Vol. 22, No. 1, Spring 2012, pp. 19-23.

· Memari, A. M., Grossenbacher, S., and Iulo, L. D., (2012). “Comparative Evaluation of Structural and Water Penetration Performance of Sustainable Masonry Walls for Residential Construction,” International Journal of Civil Engineering Science, Vol. 1, No. 1, March 2012, pp. 10-22.

· Memari, A. M., Chen, X., Kremer, P. A., and Behr, R. A., (2012). “Prediction of Seismic Failure of Silicone Sealant in Two-Sided Structural Sealant Glazing Systems,” ASCE Journal of Architectural Engineering, Vol. 18, No. 1, March 2012, pp. 16-26.

· Memari, A.M., Harris, H. G., Hamid, A. A. and Scanlon A., (2011). “Seismic Evaluation of Reinforced Concrete Bridge Piers in Low to Moderate Seismic Regions,” Electronic Journal of Structural Engineering, Vol. 11, 2011, pp. 57-68.

· Liang, J. and Memari, A. M., (2011). “Full-Scale Experimental Evaluation of a Panelized Brick Veneer Wall System under Simulated Wind Loading,” Structural Engineering and Mechanics Journal, Vol. 38, No. 1, 2011, pp. 99-123.

· Liang, J. and Memari, A. M., (2011). “Introduction of a Panelized Brick Veneer Wall System and Its Building Science Evaluation,” ASCE Journal of Architectural Engineering, Vol. 17, No. 1, March 2011, pp. 1-14.

· Memari, A. M., Shirazi, A., Kremer, P. A., and Behr, R. A., (2011). “Development of Finite Element Modeling Approach for Lateral Load Analysis of Dry-Glazed Curtain Walls”, ASCE Journal of Architectural Engineering, Vol. 17, No. 1, March 2011, pp. 24-33.

· Memari, A.M., Harris, H. G., Hamid, A. A. and Scanlon A., (2010). “Seismic Evaluation of an Elevated Highway Bridge in a Low Seismic Region,” The Open Civil Engineering Journal, Vol. 4, 2010, pp. 72-87.

· Memari, A. M., Lepage, A. and Setthachayanon, J., (2010). “Experimental Evaluation of Autoclaved Aerated Concrete Lintels Strengthened with Externally Bonded Glass FRP”, Journal of Reinforced Plastics and Composites, Vol. 29, No. 22, Nov. 2010. Also Published Online: DOI: 10.1177/0731684410373413, August 9, 2010, pp. 1-16.

· Liang, J., and Memari, A. M., (2010). “Finite Element Analysis of a Panelized Brick Veneer Wall System and Comparison with Wind Load Testing Results,” The Masonry Society Journal, Vol. 28, No. 1, 2010, pp. 7-28.

· Memari, A. M., Kasal, B., Manbeck, H. B., and Adams, A. R., (2009). “Lateral Load Resistance Evaluation of Wood and Steel Stud Partition Shear Walls” ASCE Journal of Architectural Engineering, Vol. 15, No. 4, December 2009, pp. 122-130.

· Maneetes, H. and Memari, A. M., (2009). “Finite Element Modeling and Analysis of Reinforced Concrete Cladding Panels,” Electronic Journal of Structural Engineering, Vol. 9, September 2009, pp. 62-72.

· Maneetes, H. and Memari, A. M., (2009). “Development of Analytical Modeling for an Energy-Dissipating Cladding Panel,” Structural Engineering and Mechanics Journal, Vol. 32, No. 5, July 2009, pp. 587-608.

· Eminaga, A. and Memari, A. M., (2008). “A Study on the Use of GFRP as an External Reinforcement for Autoclaved Aerated Concrete,” The Masonry Society Journal, Vol. 26, No. 2, November 2008, pp. 53-66.

· Aliaari, M. and Memari, A. M., (2007). “Experimental Evaluation of a Sacrificial Seismic Fuse Device for Masonry Infill Walls,” ASCE Journal of Architectural Engineering, Vol. 13, No. 2, June 2007, pp. 111-125.

· Memari, A. M., Shirazi, A. and Kremer, P. A., (2007). “Static Finite Element Analysis of Architectural Glass Curtain Walls Under In-Plane Loads and Corresponding Full-Scale Test,” Structural Engineering and Mechanics Journal, Vol. 25, No. 4, March 2007, pp. 365-382.

· Memari, A.M., Chen, X., Kremer, P.A., and Behr, R.A., (2006). “Seismic Performance of Two-Side Structural Silicone Glazing Systems,” Journal of ASTM International (JIA), Vol. 3 No. 10, October 2006, pp. 1-10.

· Getz, D. R. and Memari, A. M., (2006). “Evaluating the Seismic Performance of Autoclaved Aerated Concrete (AAC) Cladding Panels,” ASCE Journal of Architectural Engineering, Vol. 12, No. 1, March 2006, pp. 12-23.

· Memari, A.M., Kremer, P.A., and Behr, R.A., (2006). “Architectural Glass Panels with Rounded Corners to Mitigate Earthquake Damage,” Earthquake Spectra Journal, Volume 22, No. 1, February 2006, pp. 129-150.

· Aliaari, M. and Memari, A. M., (2005). “Analysis of Masonry Infilled Steel Frames with Seismic Isolator Subframes,” Engineering Structures Journal, Vol. 27, 2005, pp. 487-500.

· Memari, A. M., Harris, H. G., Hamid, A. A. and Scanlon, A., (2005). “Ductility Evaluation for Typical Existing R/C Bridge Columns in the Eastern U.S.A.,” Engineering Structures Journal, Vol. 27, No. 2, January 2005, pp. 203-212.

· Memari, A. M., Maneetes, H. and Bozorgnia, Y., (2004). “A Study of the Effect of Near-Source Vertical Ground Motion on Seismic Design of Precast Concrete Cladding Panels,” ASCE Journal of Architectural Engineering, Vol. 10, No. 4, December 2004, pp. 167-184.

· Memari, A. M. and Scanlon, A., (2004). “Assessment of Reinforced Concrete Bridge Piers Under Low to Moderate Seismic Induced Loads,” Journal of Seismology and Earthquake Engineering, Vol. 6, No. 2, Summer 2004, pp. 57-64.

· Memari, A. M., Kremer, P. A. and Behr, R. A., (2004). "Dynamic Racking Crescendo Tests on Architectural Glass Fitted with Anchored "PET" Film," ASCE Journal of Architectural Engineering, Vol. 10. No. 1, March 2004, pp. 5-14.

· Memari, A. M., Behr, R. A. and Kremer, P. A., (2003). “Seismic Behavior of Curtain Walls Containing Insulating Glass Units,” ASCE Journal of Architectural Engineering, Vol. 9, No. 2, June 2003, pp. 70-85.

· Memari, A. M., Aliaari, M. and Hamid, A. A., (2002). “Evaluation of Seismic Performance of Anchored Brick Veneer Walls,” Performance of Exterior Building Walls, ASTM STP 1422, P.G. Johnson, Ed., American Society of Testing and Materials, West Conshohocken, PA, 2002, pp.115-131.

· Memari, A. M., Burnett, E. F. P. and Kozy, B. M., (2002). “Seismic Performance of Masonry Ties Used in Brick Veneer Walls,” Construction and Building Material Journal, Vol. 16, Issue 7, October 2002, pp. 397-407.

· Memari, A.M., Rafiee, S., Motlagh, A.Y. and Scanlon, A., (2001). “Comparative Evaluation of Seismic Assessment Methodologies Applied to a 32-Story Reinforced Concrete Office Building,” Journal of Seismology and Earthquake Engineering, Vol. 3, No. 1, Summer 2001, pp. 31-44.

· Brueggeman, J.L., Behr, R.A., Wulfert, H., Memari, A.M. and Kremer, P., (2000). “Dynamic Racking Performance of an Earthquake-Isolated Curtain Wall System,” EERI Earthquake Spectra Journal, Vol. 16, No. 4, November 2000, pp. 735-756.

· Astarlioglu, S, Memari, A. M. and Scanlon, A., (2000). “Ductility Based Seismic Design of Precast Concrete Large Panel Buildings,” Structural Engineering and Mechanics Journal, Vol. 10, No. 4, October 2000, pp. 405-426.

· Memari, A. M., Motlagh, A. Y. and Scanlon, A. (2000). “Seismic Evaluation of an Existing Reinforced Concrete Framed Tube Building Based on Inelastic Dynamic Analysis,” Engineering Structures Journal, Vol. 22, No. 6, June 2000, pp. 621-637.

B. Conference Proceedings

· Wu, Z, Memari, A. M., and Duarte, J. P., (2022). “Practical Construction of 3D Printed Reinforced Concrete Members,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 424-435. ISBN 978-1-62307-009-0.

· Wu, Z, Memari, A. M., and Duarte, J. P., (2022). “Review of Mechanical and Structural Testing for 3D Printed Concrete,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 436-445. ISBN 978-1-62307-009-0.

· Yi, H., Griffin, C., and Memari, A. M., (2022). “Critical Review of the Characterization of Environmental and Mechanical Properties of Hemp Hurd and Hempcrete,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 208-216. ISBN 978-1-62307-009-0.

· Brown, N., Duarte, J., Memari, A., Xiao, M., Nazarian, S. Duarte, G., and Wu, Z., (2022). “A Comparison of Thermal Insulation Strategies for 3D Printed Concrete Structures in Cold Regions,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 352-361. ISBN 978-1-62307-009-0.

· Wang, Z.-Y., Xiao, M., Memari, A., and Na, X., (2022). “Design and Construction Approaches of Foundations in Permafrost with an Application for a 3-D Printed Habitat in the Arctic,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 559-568. ISBN 978-1-62307-009-0.

· Yadav, R. and Memari, A. M., (2022). “Case Study Finite Element Modeling and Analysis of a CLT Tornado Shelter,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 631-640. ISBN 978-1-62307-009-0.

· Yadav, R. and Memari, A. M., (2022). “Review of Different Types and Performances of Tornado Shelters for Residential Buildings,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 621-630. ISBN 978-1-62307-009-0.

· Duarte, G., Memari, A. M., Brown, N., Duarte, J., and Wu, Z., (2022). “Structural Evaluation of a Proposed Concrete 3D Printed Habitat in Remote Alaska,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 342-351. ISBN 978-1-62307-009-0.

· Jellen, A. C. and Memari, A. M., (2022). “Structural Design of a Cross-Laminated Timber (CLT) Single-Family Home,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 109-118. ISBN 978-1-62307-009-0.

· Erisman, C., Iulo, L., Abdelwahab, K., Griffin, C., and Memari, A. M., (2022). “Overview of common residential wall construction methods applied to achieve a continuous air barrier and their material properties,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 579-588. ISBN 978-1-62307-009-0. Penn State University, University Park, PA, March 2-3, 2022, 10p.

· Ulmer, B. and Memari, A. M., (2022). “State of the Art Review of Building Enclosure Use of Cross-Laminated Timber,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 641-649. ISBN 978-1-62307-009-0.

· Mirzai, N. M. and Memari, A. M., (2022). “Review of Structural Load Resisting Systems for Cross-Laminated Timber Multi-story Residential Buildings,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 601-610. ISBN 978-1-62307-009-0.

· Welch, S., Obonyo, E., and Memari, A. M., (2022). “Energy modeling to determine optimum order of component installation in stepwise retrofit towards EnerPHit standard,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 261-270. ISBN 978-1-62307-009-0.

· Welch, S., Obonyo, E., and Memari, A. M., (2022). “Evaluation of Software Packages for Energy Modeling of Phased Deep Energy Retrofits to Passive House standards,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 549-558. ISBN 978-1-62307-009-0. Penn State University, University Park, PA, March 2-3, 2022, 10p.

· Abdelwahab, K., Griffin, C., Memari, A. M., and Iulo, L., (2022). “Small-Scale Testing of Air Barrier Systems Adhered on Sheathing Panels Under In-plane Relative Displacement Simulating Seismic Effect,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 372-381. ISBN 978-1-62307-009-0.

· Habibi, S. and Memari, A. M., (2022). “On the Use of Plastic Waste in Building Construction Industry,” Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual, Penn State University, University Park, PA, May 11-12, 2022, pp. 446-455. ISBN 978-1-62307-009-0.

· Muthumanickam, N. K., Duarte, J. P., Nazarian, S., Bilén, S., and Memari, A. M. (2021). “BIM for Design Generation, Analysis, Optimization, and Construction Simulation of an Additively Constructed Martian Habitat,” Proceedings of the ASCE Earth & Space 2021Conference – Materials, Structures, Dynamics, and Control in Extreme Environments, Eds. Paul J. Susante and Alaina D. Roberts, ASCE, ISBN 978-0-7844-8338-1, April 19-23, 2021, Virtual Conference, pp. 1208-1219.

· Muthumanickam, N. K., Park, K., Duarte, J. P., Nazarian, S., Memari, A. M., and Bilén, S. (2020). “BIM for Parametric Problem Formulation, Optioneering and 4D Simulation of 3D Printed Martian Habitat: A Case Study of the NASA 3D Printed Habitat Challenge,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 15p.

· Nazarian, S., Duarte, J. P., Bilén, S., Memari, A. M., Muthumanickam, N. K., Watson, N., Radlinska, A., Ashrafi, N., and Hojati, M., (2020). “An Overview of the Execution of 3D-Printed Subscale Habitat on Mars: A Case Study to Exemplify the Automated Construction Process,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 6p.

· Hindman, D. and Memari, A. M., (2020). “Mass Customized Cross-Laminated Timber Elements for Residential Construction,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 7p.

· Amini, M. and Memari, A. M., (2020). “Performance of Residential Buildings in Hurricane Prone Coastal Regions and Lessons Learned for Damage Mitigation,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 14p.

· Amini, M. and Memari, A. M., (2020). “Evaluation of Various Retrofit Strategies for Existing Residential Buildings in Hurricane Prone Coastal Regions,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 12p.

· Park, K., Memari, A. M., Hojati, M., Nazarian, S., and Duarte, J. P. (2020). “Structural Analysis of Full-Scale and Sub-Scale Structure for Digitally Designed Martian Habitat,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 18p.

· Park, K., Memari, A. M., Hojati, M., Zahabi, M., Nazarian, S., and Duarte, J. P. (2020). “Experimental Testing and Finite Element Modeling of 3D-Printed Reinforced Concrete Beams,” Proceedings of the 5^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 4-6, 2020, 15p.

· Habibi, S., Obonyo, E., and Memari, A. M., (2020). “A New Concept for the Integration of Bamboo in Contemporary Vernacular Architecture,” Proceedings of the 43^rd IAHS World Housing Congress – Housing in the Third Millennium between Tradition and Innovation, International Association for Housing Science, March 16-17, 2020, Cochabamba, Bolivia, 9p.

· Habibi, S., Obonyo, E., and Memari, A. M., (2019). “Design and Development of Energy Efficient Re-roofing Solutions,” Proceedings of the Building Simulation 2019 Conference, Rome, Italy, September 2-4, 2019, 7p.

· Habibi, S., Obonyo, E., and Memari, A. M., (2019). “A Bamboo Design Concept for Low Income Housing in Kenya,” Proceedings of the 18^th International Conference on Non-Conventional Materials and Technologies “Construction Materials & Technologies for Sustainability” (18^th NOCMAT 2019), July 24-26, 2019, Nairobi, Kenya, 14 pages.

· Lu, X. and Memari, A. M., (2019). “Application of Infrared Thermography Method for In-Situ Measurement of Thermal Properties of Building Envelope Systems,” Proceedings, ASCE AEI 2019 Conference – Integrated Building Solutions – The National Agenda, April 3-6, 2019, Washington, DC, 10 pages.

· Kamel, E. and Memari, A. M., (2019). “Review of Building Science Application in Selected DOE’s Race to Zero Student Design Competition Projects,” Proceedings, ASCE AEI 2019 Conference – Integrated Building Solutions – The National Agenda, April 3-6, 2019, Washington, DC, 10 pages.

· Habibi, S. and Memari, A. M., (2018). “Review of Smart Envelope Systems for Multi-story Residential and Commercial Buildings,” Proceedings of the 42^nd IAHS World Congress – The Housing for the Dignity of Mankind, April 10-13, 2018, Naples, Italy, pp. 1-13.

· Sagiroglu, M. and Memari, A. M., (2018). “Learning from the Experiences of Using Different Types of Temporary Housing Systems,” Proceedings of the 42^nd IAHS World Congress – The Housing for the dignity of Mankind, April 10-13, 2018, Naples, Italy, 12p.

· Ko, M., Memari, A. M., Duarte, J. P., Nazarian, S., Ashrafi, N., Craveiro, F., and Bilen, S., (2018). “Preliminary Structural Testing of a 3D Printed Small Concrete Beam and Finite Element Modeling of a Dome Structure,” Proceedings of the 42^nd IAHS World Congress – The Housing for the Dignity of Mankind, April 10-13, 2018, Naples, Italy, pp. 1-17.

· Hojati, M., Radlinska, A., Nazarian, S., Duarte, J., Memari, A. M., and Bilen, S., (2018). “Synthesis and 3D Printing of One-Part Geopolymer Mortar,” Proceedings of the 1^st International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Zurich, Switzerland, September 10-12, 2018.

· Hojati, M., Radlinska, A., Nazarian, S., Duarte, J., Memari, A. M., Meisel, N., and Bilen, S., (2018). “Design and 3D Printing of Two-Part Geopolymer Mortar,” Proceedings of the 1^st International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Zurich, Switzerland, September 10-12, 2018, 3p.

· Solnosky, R., Memari, A. M., and Kremer, P. A., (2018). “Racking Testing Facility to Evaluate In-Plane Performance of Structural Insulated Panels,” Proceedings of the 4^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 28 to March 1, 2018, 16p.

· Jellen, A. C. and Memari, A. M., (2018). “Concept Paper: MODs – Next Generation Mobile Housing,” Proceedings of the 4^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 28 to March 1, 2018, 20p.

· Kamel, E. and Memari, A. M., (2018). “Software Tool for Automation in Residential Building Energy Simulation and Monitoring,” Proceedings of the 4^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 28 to March 1, 2018, 9p.

· Zahabi, M., Said, A., and Memari, A. M., (2018). “A Brief Literature Study of Nanoparticles Supplementation in Civil Cementitious Materials,” Proceedings of the 4^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 28 to March 1, 2018, 17p.

· Lu, X. and Memari, A. M., (2018). “Thermal Resistance Simulation of Different Conventional and Innovative Insulation Technologies,” Proceedings of the 4^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 28 to March 1, 2018, 17p.

· Habibi, S. and Memari, A. M., (2018). “Role of BIM in Designing Zero-Net Energy Homes,” Proceedings of the 4^th Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 28 to March 1, 2018, 15p.

· Sagiroglu, M. and Memari, A. M., (2016). “Review of Developments and New Innovations in Temporary Housing and Foldable Buildings,” Proceedings of the 41^st IAHS World Congress – Sustainability and Innovation for the Future, September 13-16, 2016, Alufeira, Algarve, Portugal, 10 P.

· Zahmatkesh, F., Memari, A., Said, A., Griffin, B., and Kremer, P., (2016). “Concepts for High Temperature Furnace Testing of Sealed Building Members and Connections under Axial Load,” Proceedings of the 3^rd Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 2-3, 2016, 12 p.

· Kamel, E. and Memari, A. M., (2016). “Different Methods in Building Envelope Energy Retrofit,” Proceedings of the 3^rd Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 2-3, 2016, 21 p.

· Jellen, A. C. and Memari, A. M., (2016). “An Approach to Analytical Modeling of Modular Vertical Expansions,” Proceedings of the 3^rd Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 2-3, 2016, 11 p.

· Huang, W. and Memari, A. M., (2016). “Review of Test Methods for Selected Building Enclosure Component Types,” Proceedings of the 3^rd Residential Building Design and Construction Conference, Penn State University, University Park, PA, March 2-3, 2016, 18 p.

· Ramaji, I. J. and Memari, A. M., (2015). “Information Exchange Standardization for BIM Application to Multi-Story Modular Residential Buildings,” Proceedings of the ASCE 2015 Architectural Engineering Institute Conference, Milwaukee, Wisconsin, March 24-27, 2015, 12 p.

· Kamel, E. and Memari, A. M., (2015). “Energy Efficiency and Sustainability Attribute of the Solar Decathlon Projects,” Proceedings of the ASCE 2015 Architectural Engineering Institute Conference, Milwaukee, Wisconsin, March 24-27, 2015, 12 p.

· Solnosky, R. L. and Memari, A. M., (2015). “Sustainability Matrices for Efficient and Innovative Residential Building Wall Systems,” Proceedings of the Engineering Solutions for Sustainability: Materials & Resources, Editors: J. E. Fergus, B. Mishra, D. Anderson, E. A. Sarver, and N. R. Neelameggham, TMS (The Minerals, Metals & Materials Society), March 18-19, 2015, Orlando, FL, pp. 177-186.

· Leung, M.-Y., Yu, J., and Memari, A. M., (2014). “Managing Indoor Facilities in Public Housing To Improve Elderly Quality of Life,” Proceedings of the 40^th IAHS World Congress on Housing, December 16-19, 2014, Funchal, Portuguese Madeira Island, 13 p.

· Solnosky, R. L., Memari, A. M., and Ramaji, I. J., (2014). “Structural BIM Processes for Modular Multi-story Buildings in Design and Construction,” Proceedings of the 2^nd Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 19-20, 2014, pp. 201-215.

· Ramaji, I. J., Memari, A. M., and Solnosky, R. L., (2014). “Evaluation of Software for Application in Multi-story Modular Building Construction,” Proceedings of the 2^nd Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 19-20, 2014, pp. 230-244.

· Ariosto, T. M. and Memari, A. M., (2014). “Evaluation of Venetian Blind Attributes for Energy Efficiency,” Proceedings of the 2^nd Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 19-20, 2014, pp. 64-81.

· Jellen, A. C. and Memari, A. M., (2014). “Residential Vertical Expansion of Existing Commercial Buildings Using Modular Construction Methods,” Proceedings of the 2^nd Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 19-20, 2014, pp. 216-229.

· Kamel, E. and Memari A. M., (2014). “Review of Different Components of Solar Decathlon House Projects,” Proceedings of the 2^nd Residential Building Design and Construction Conference, Penn State University, University Park, PA, February 19-20, 2014, pp. 335-354.

· Jellen, A. C. and Memari, A. M., (2013). “The State of the Art Application of Modular (Factory Built) Technologies to the Construction of New Multi-story Residential Buildings,” Proceedings of the 1^st Residential Building Design and Construction Conference, Bethlehem, PA, February 20-21, 2013, pp. 284-293.

· Ramaji, I. J. and Memari, A. M., (2013). “Identification of Structural Issues in Design and Construction of Multi-story Modular Buildings,” Proceedings of the 1^st Residential Building Design and Construction Conference, Bethlehem, PA, February 20-21, 2013, pp. 294-303.

· Ariosto, T. and Memari, A. M., (2013). “State-of-the-Art Review of Window Retrofit Options for Energy Saving in Single-family Dwellings,” Proceedings of the 1^st Residential Building Design and Construction Conference, Bethlehem, PA, February 20-21, 2013, pp. 221-230.

· Simmons, N. C. and Memari, A. M., (2013). “Finite Element Modeling to Predict Racking Test Results and Performance of Four-sided Structural Sealant Glazing Curtain Wall Systems,” Proceedings of 2013 Architectural Engineering Conference, University Park, PA, April 3-5, 2013, pp. 735-744.

· Simmons, N. C. and Memari, A. M., (2013). “Development of Kinematic Equations for Racking Performance Evaluation of Four-sided Structural Sealant Glazing Curtain Wall Systems,” Proceedings of 2013 Architectural Engineering Conference, University Park, PA, April 3-5, 2013, pp. 997-1006.

· Simmons, N. C. and Memari, A. M., (2013). “Racking Performance Analysis of Four-sided Structural Sealant Glazing Curtain Wall Systems through Video Capture Technique,” Proceedings of 2013 Architectural Engineering Conference, University Park, PA, April 3-5, 2013, pp. 725-734.

· Ariosto, T. and Memari, A. M., (2013). “Comparative Study of Energy Efficiency of Glazing Systems for Residential and Commercial Buildings,” Proceedings of 2013 Architectural Engineering Conference, University Park, PA, April 3-5, 2013, pp. 408-417.

· Thiede, J. and Memari, A. M., (2013). “Evaluation of the Performance of Air and Vapor Barriers under Seismic Induced Light-frame Wall Deformations,” Proceedings of 2013 Architectural Engineering Conference, University Park, PA, April 3-5, 2013, pp. 837-846.

· Memari, A. M., (2012). “Comparative Study of Multi-hazard Performance of Different Wall Systems Used in Single-Family Dwelling Construction,” Proceedings of the ASCE 6^th Congress on Forensic Engineering – Gateway to a Safer Tomorrow, San Francisco, CA October 31-November 3, 2012, pp. 1053-1062.

· Memari, A. M., (2012). “Review of the Performance of Glazing Systems in Earthquakes and Recent Developments to Mitigate Damage,” Proceedings of the ASCE 6^th Congress on Forensic Engineering – Gateway to a Safer Tomorrow, San Francisco, CA October 31-November 3, 2012, pp. 123-132.

· Memari, A. M., Fisher, S., Krumenacker, C., Broker, K. A., and Modrich, R.-U., (2011). “Evaluation of the Structural Sealant for Use in Four-Sided SSG Curtain Wall System for Cathedral Hill Hospital Project,” Proceedings of the 4^th Symposium on Durability of Building and Construction Sealants and Adhesives, Anaheim, CA, June 16-17, 2011, 23 pages.

· Broker, K. A., Fisher, S., and Memari, A. M., (2011). “Seismic Racking Test Evaluation of Silicone Used in a 4-Sided Structural Sealant Glazed Curtain Wall System,” Proceedings of the 4^th Symposium on Durability of Building and Construction Sealants and Adhesives, Anaheim, CA, June 16-17, 2011, 24 pages.

· Memari, A. M., Fisher, S., Krumenacker, C., Charbonneau, K. A., and Modrich, R. U., (2011). “Seismic Evaluation of the Four-Sided Structural Sealant Glazing Curtain Wall System for Cathedral Hill Hospital Project,” Proceedings of 2011 Architectural Engineering Conference, Oakland, CA, March 30-April 2, 2011, pp. 164-172.

· Memari, A. M. and Standley, J. A., (2011). “Introduction of a Transparent Sustainable Load-Bearing Wall System with Integrated Photovoltaic for Residential Construction,” Proceedings of 2011 Architectural Engineering Conference, Oakland, CA, March 30-April 2, 2011, pp. 139-147.

· Memari, A. M., Hartman, K., Kremer, P. A., (2011). “Racking Test Evaluation of Unitized Curtain Wall Systems Using Glazing Tapes,” Proceedings of 2011 Architectural Engineering Conference, Oakland, CA, March 30-April 2, 2011, pp. 148-155.

· Shoemaker, J. M., Lepage, A., and Memari, A. M., (2011). “Acceleration Response of Nonstructural Components in Building Structures during Earthquakes,” Proceedings of 2011 Architectural Engineering Conference, Oakland, CA, March 30-April 2, 2011, 8 pages.

· Standley, J. A. and Memari, A. M., (2010). “Development of a Transparent Sustainable Wall System with Load Bearing Backup Framing for Residential Construction,” The 6^th International Conference on Innovation in Architecture, Engineering and Construction (AEC), University Park, PA, June 9-11, 2010, 10 pages.

· Kuczynski, T. C. and Memari, A. M., (2009). “Evaluation of a Multi-Hazard Resistant Panelized Brick Veneer on Steel Stud Wall System for Out-of-Plane Failure Loading”, Proceedings of the 2^nd International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading (PROTECT2009), Hayama, Japan, August 19-21, 2009, 10 pages.

· Memari, A. M., Grossenbacher, S. V., and Iulo, L. D., (2008). “In-plane and Out-of-plane Load Testing and Evaluation of Sustainable Masonry Walls,” Proceedings of the AEI 2008 Conference – Building Integrated Solutions, Denver, CO, September 25-27, 2008, 10 pages.

· Memari, A. M. and Sambol, M., (2008). “Experimental Evaluation of the Effect of Drywall Joint Compound on Shear Capacity of Wood-frame Walls,” Proceedings of the AEI 2008 Conference – Building Integrated Solutions, Denver, CO, September 25-27, 2008, 10 pages.

· Memari, A. M., Grossenbacher, S. V., and Iulo, L. D., (2008). “Structural Testing of High Thermal Mass Walls Used in Sustainable Designs,” Proceedings of 2008 Structures Congress – Crossing Borders, Vancouver, Canada, April 24-26, 2008, 9 pages.

· Memari, A. M., Kasal, B., Adams, A. R., and Manbeck, H. B., (2008). “Comparison of In-plane Lateral Load Resistance of Interior Steel Stud and Wood Stud Light-frame Walls,” Proceedings of 2008 Structures Congress – Crossing Borders, Vancouver, Canada, April 24-26, 2008, 10 pages.

· Aliaari, M. and Memari, A. M., (2006). “Experimental Evaluation of a Sacrificial System for Masonry Infill Walls,” Proceedings of 2006 Architectural Engineering Conference – Building Integration Solutions, Omaha, Nebraska, March 30-April 2, 2006, CD-ROM, 15 pages.

· Memari, A. M., Chen, X., Kremer, P. A., and Behr, R. A., (2006). “Development of Failure Prediction Models for Structural Sealant Glazing Systems under Cyclic Racking Displacement Conditions,” Proceedings of 2006 Architectural Engineering Conference – Building Integration Solutions, Omaha, Nebraska, March 30-April 2, 2006, CD-ROM, 15 pages.

· Memari, A. M., Chen, X., Kremer, P. A., and Behr, R. A., (2005). “Seismic Performance of Structural Silicone Glazing Systems,” Proceedings of the ASTM 2005-DBCSA Symposium on Durability of Building and Construction Sealants and Adhesives, Reno, Nevada, June 15-16, 2005, 18 pages.

· Memari, A. M. and Kauffman, A., (2005). “Review of Existing Seismic Retrofit Methodologies for Adobe Dwellings and Introduction of a New Concept,” Proceedings of the SismoAdobe2005 Conference, Lima, Peru, May 16-19, 2005, CD-ROM, 15 pages.

· Memari, A. M. and Shirazi, A., (2004). “Development of a Seismic Rating System for Architectural Glass in Existing Curtain Walls, Storefronts, and Windows,” Proceedings of the 13^th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, 2004, CD-ROM, Paper No. 1541, 13 pages.

· Astarlioglu, S., Scanlon, A., and Memari, A. M., (2004). “Recent Developments in SNAPS3D – A Finite Element Analysis Program for 3-Dimensional Nonlinear Time-History Analysis of Precast Concrete Structures,” Proceedings of the 13^th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, 2004, CD-ROM, Paper No. 78, 8 pages.

· Memari, A. M. and Aliaari, M., (2004). “Seismic Isolation of Masonry Infill Walls,” Proceedings of 2004 ASCE Structures Congress & Exposition, Nashville, Tennessee, May 22-26, 2004, CD-ROM 10 pages.

· Memari, A. M., (2003). “Full-Scale Racking Test Evaluation of Autoclaved Aerated Concrete (AAC) Cladding Panels,” Proceedings of ATC-29-2 Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities, Los Angeles, CA, October 23-24, 2003, 14 pages.

· Memari, A. M. and Aliaari, M., (2003). “Pushover Analysis of Masonry Infilled R/C Frames with Seismic Infill Wall Isolator Subframe (SIWIS) System,” Proceedings of Earthquake Resistant Engineering Structures (ERES) 2003, Ancona, Italy, September 22-24, 2003, pp. 191-202.

· Behr, R. A., Kremer, P. A. and Memari, A. M., (2003). “Earthquake Damage Resistant Architectural Glass Panels,” Proceedings of 2003 Architectural Engineering Conference -- Building Integration Solution, ASCE-AEI, Austin, TX, September 17-20, 2003, 5 pages.

· Memari, A. M., (2003). “Recent Developments in Seismic Isolation Systems for Masonry Infill and Brick Veneer Walls,” Proceedings of 2003 Architectural Engineering Conference -- Building Integration Solution, ASCE-AEI, Austin, TX, September 17-20, 2003, 5 pages.

· Memari, A. M. and Chusid, M. T., (2003). “Introduction to Architectural Aspects and Developments in Research on Structural Performance of Autoclaved Aerated Concrete (AAC) Products,” Proceedings of 2003 Architectural Engineering Conference -- Building Integration Solution, ASCE-AEI, Austin, TX, September 17-20, 2003, 5 pages.

· Memari, A. M., Liang, J. and Burnett, E. F. P., (2003). “Development of a Multihazard Resistant Panelized Brick Veneer Wall System,” Proceedings of Structural Faults & Repair-2003, July 1-3, 2003, London, UK, CD-ROM, pp. 1-10.

· Memari, A. M., (2003). “Seismic Design of Precast Concrete Cladding Panels Considering the Effect of Vertical Ground Acceleration,” 2003 Structures Congress & Exposition, Seattle, Washington, May 29-31, 2003, pp. 1-2.

· Memari, A. M. and Eminaga, A., (2002). "Preliminary Results on the Use of GFRP as an External Reinforcement for Autoclaved Aerated Concrete," Proceedings, Advances in Building Technology (ABT 2002), Hong Kong, December 4-6, 2002, pp. 865-872.

· Memari, A. M. and Getz, D., (2002). “Seismic Performance of Autoclaved Aerated Concrete (AAC) Cladding Panels,” Proceedings, 12^th European Conference on Earthquake Engineering, London, UK, September 9-13, 2002, CD-ROM, pp. 1-10.

· Memari, A. M., Shirazi, A. and Kremer, P. A., (2002). "Finite Element Analysis of Architectural Glass Curtain Walls Subjected to In-Plane Lateral Loads ," Proceedings, 2nd International Conference on Advances in Structural Engineering and Mechanics (ASEM’02), Busan (Pusan), Korea, August 21-23, 2002, CD-ROM, pp. 1225-1232.

· Memari, A. M., Maneetes, H. and Bozorgnia, Y., (2002). "Effect of Near-Field Vertical Ground Motion on Seismic Design of Precast Concrete Cladding Panels," Proceedings, 2nd International Conference on Advances in Structural Engineering and Mechanics (ASEM’02), Busan (Pusan), Korea, August 21-23, 2002, CD-ROM, pp. 962-969.

· Memari, A. M., Harris, H. G., Hamid, A. A. and Scanlon, A., (2002). “Estimation of R-Factor for Reinforced Concrete Bridge Columns with Apparently Deficient Confinement Reinforcement,” Proceedings, 7^th U.S. National Conference on Earthquake Engineering, Boston, Massachusetts, July 21-25, 2002, CD-ROM, pp. 1-10.

· Memari, A. M., Behr, R. A. and Kremer, P. A., (2002). “Seismic Retrofit of Architectural Glass Using Anchored Applied Film,” Proceedings, 7^th U.S. National Conference on Earthquake Engineering, Boston, Massachusetts, July 21-25, 2002, CD-ROM, pp. 1-10.

· Memari, A. M. and Aliaari, M., (2002). "Seismic Infill Wall Isolator Subframe (SIWIS) System for Use in Buildings," Proceedings, ATC-17-2 Seminar on Response Modification Technologies for Performance-Based Design, Los Angeles, CA, May 30-31, 2002, pp. 189-200.

· Memari, A. M., Behr, R. A. and Kremer, P. A., (2002). “Seismic Damage Mitigation Methods for Architectural Glass Used in Curtain Walls,” Proceedings, 2002 Structures Congress & Exposition – Compilation of Abstracts, Denver, CO, April 4-6, 2002, pp. 421-422.

· Memari, A. M. and Kremer, P. A., (2001). "Employing Glass Panels with Rounded Corners to Reduce Seismic Damage in Architectural Glass Wall Systems," Proceedings, 3rd International Conference on Earthquake Resistant Engineering Structures (ERES 2001), Malaga, Spain, September 4-6, 2001, pp. 231-241.

· Scanlon, A., Memari, A. M. and Amini, A. R., (2001). "Assessment of Bridge Piers for Seismic Resistance in the Eastern United States," Proceedings, 9th International Conference on Structural Faults and Repair, Kensington, London, England, July 4-6, 2001, CD-ROM pp. 1-6.

· Memari, A. M., Burnett, E. F. P. and Kozy, B. M., (2001). "Seismic Response of a New Type of Masonry Tie Used in Brick Veneer Walls," Proceedings, 9th International Conference on Structural Faults and Repair, Kensington, London, England, July 4-6, 2001, CD-ROM pp. 1-10.

· Behr, R. A., Wulfert, H., Memari, A. M., Kremer, P. A. and Brueggeman, J. L., (2000). "An Earthquake-Isolated Curtain Wall System," Fifth Conference on Tall Buildings in Seismic Regions, Los Angeles, California, May 5-6, 2000, pp. 15-30.

· Astarlioglu, S., Memari, A. M. and Scanlon, A. (2000). "Modeling Strategies for Three-Dimensional Analysis of Precast Panel Buildings Under Seismic Load," Proceedings, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, January 30 – February 4, 2000, CD-ROM pp. 1-7.

· Memari, A. M., Behr, R. and Kremer, P. (2000). "The Role of Small-Scale Tests of Glass Plates in Seismic Design of Architectural Glazing Systems," Proceedings, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, January 30 – February 4, 2000, CD-ROM pp. Paper No. 2/40, pp. 1-8.

C. Book Chapters

· Nazarian, S., Duarte, J. P., Bilén, S. G., Memari, A., Radlinska, A., Meisel, N., and Hojati, M., (2021). “Additive Manufacturing of Architectural Structures: An Interplay Between Materials, Systems, and Design,” in Sustainability and Automation in Smart Constructions; Editors: Leiria, Portugal; Editors: H. Rodrigues, F. Gaspar, P. Fernandes, and A. Mateus; Advances in Science, Technology & Innovation (IEREK Interdisciplinary Series for Sustainable Development). Springer, Cham., pp. 111-119, September 2020, ISBN: 978-3-030-35532-6 https://doi.org/10.1007/978-3-030-35533-3_15.

· Muthumanickam, N. K., Duarte, J. P., Nazarian, S., Memari, A. M., and Bilén, S., (2021). “Combining AI and BIM in the design and construction of a Mars habitat,” Chapter 13 in The Routledge Companion to Artificial Intelligence in Architecture, Editors: Imdat As and Prithwish Basu, 29 p., Published May 6, 2021, https://doi.org/10.4324/9780367824259; ISBN 9780367424589.

· Jellen, A. J. and Memari, A. M., (2019). “Structural Design of a Typical American Wood-frame Single-family Home,” Chapter in Book: Structural Engineering for Buildings, Editor: Giovanna Concu, IntechOpen, London, United Kingdom, pp. 1-28; DOI: 10.5772/intechopen.85929; https://www.intechopen.com/online-first/structural-design-of-a-typical-american-wood-framed-single-family-home.

· Memari, A. M. and Aliaari, M., (2018). “Finite Element Modeling of Masonry Infill Walls Equipped with Structural Fuse,” Chapter in Book: Structural Engineering for Buildings, Editor: Hakan Yalciner, IntechOpen, London, United Kingdom. ISBN: 978-1-78984-507-5, pp. 27-56. http://dx.doi.org/10.5772/intechopen.77307.

https://www.intechopen.com/books/new-trends-in-structural-engineering/finite-element-modeling-of-masonry-infill-walls-equipped-with-structural-fuse.

· Memari, A. M., (2015). “Seismic Evaluation of the Behavior of Building Envelope Systems,” Chapter 12 in Book: New Trends in Seismic Design of Structures, Editors: Nikos D. Lagaros, Yiannis Tsompanakis, and Manolis Papadrakakis, SAX/2012/00048, Saxe-Coburg, Saxe-Coburg, ISBN 978-1-874672-37-1, pp. 363-398.

· Memari, A. M., (2013). “Design of Curtain Walls for Earthquake Induced Loads and Drifts,” in Curtain Wall Systems – A Primer, Editor: Ali M. Memari, American Society of Civil Engineers (ASCE), ISBN 978-0-7844-1270-1 (paper); ISBN 978-0-7844-7768-7 (pdf).

· Memari, A. M., (2013). “New Developments in Curtain Wall Systems,” in Curtain Wall Systems – A Primer, Editor: Ali M. Memari, American Society of Civil Engineers (ASCE), ISBN 978-0-7844-1270-1 (paper); ISBN 978-0-7844-7768-7 (pdf).

· Memari, A. M. and Lepage, A., (2011). “Introduction of an Innovative Bolted Mortarless Concrete Masonry System – Review of Preliminary Test Data and Strength Evaluation,” Chapter in Book: Masonry: Types, Techniques, and Applications, Editor: Maryann C. Wythers, Advances in Material Science Research, Vol. 4, Published as eBook by Nova Science Publishers, Inc., ISBN: 978-1-61122-394-1, 2011, pp. 91-144.

· Memari, A. M., (2011). “Assessment of the Performance of Building Envelope Systems on Key Critical Facilities,” Chapter 3 in Special Publication: Multidisciplinary Assessment of Critical Facilities Response to Natural Disasters – the case of Hurricane Katrina, Edited by A. W. Hapij, AEI Task Committee for the Study of the Aftermath of Hurricane Katrina, Architectural Engineering Institute of the American Society of Civil Engineers, Reston, VA, ISBN 978-0-7844-1134-6, 2011, 121 p.

· Memari, A. M. and Schwartz, T. A., (2009). “Glazing and Curtain Wall Systems to Resist Earthquakes,” Chapter 2 in Book: Architectural Glass to Resist Seismic and Extreme Climatic Events, Editor: Richard A. Behr, Woodhead Publishing Limited, ISBN-13: 978 1 84569 369 5, September 2009, pp. 28-63.

D. Edited Books and Conference Proceedings

· Memari, A. M. and Lowe, S. K., (2022). Editors, Proceedings of the 6^th Residential Building Design and Construction Conference, Virtual Conference, including 61 papers, May 11-12, 2022, Virtual, The Pennsylvania Housing Research Center, Penn State University, University Park, PA, ISBN: 978-1-62307-009-0; 667 p.

· Memari, A. M. and Lowe, S. K., (2020). Editors, Proceedings of the 5^th Residential Building Design and Construction Conference, State College, PA, March 4-6, 2020, The Pennsylvania Housing Research Center, Penn State University, University Park, PA, ISBN: 978-1-62307-007-6, 744p.

· Memari, A. M. and Lowe, S. K., (2018). Editors, Proceedings of the 4^th Residential Building Design and Construction Conference, State College, PA, February 28-March 1, 2018, The Pennsylvania Housing Research Center, Penn State University, University Park, PA, ISBN: 978-1-62307-005-2, 711 p.

· Memari, A. M. and Lowe, S. K., (2016). Editors, Proceedings of the 3^rd Residential Building Design and Construction Conference, State College, PA, March 2-3, 2016, The Pennsylvania Housing Research Center, Penn State University, University Park, PA, ISBN: 978-1-62307-004-5, 428 p.

· Memari, A. M. and Wolfgang, B. M., (2014). Editors, Proceedings of the 2^nd Residential Building Design and Construction Conference, State College, PA, February 19-20, 2014, The Pennsylvania Housing Research Center, Penn State University, University Park, PA, ISBN 978-I-62307-003-8, 401 p.

http://www.engr.psu.edu/phrc/Conference/2014%20Conference/2014RBDCCProceedingsFINAL.pdf.

· Memari, A. M., (2013). Proceedings of the 1^st Residential Building Design and Construction Conference, Bethlehem, PA, February 20-21, 2013, Editor, ISBN: 978-1-62307-000-7, 423 p. pages, http://www.engr.psu.edu/phrc/Conference/2013%20Conference/Residential%20Bldg%20Design/Proceedings%201st%20RBDCC%202013%20FINAL.pdf.

· Memari, A. M., (2013). Editor, Curtain Wall Systems – A Primer, Consisting of 12 Chapters, American Society of Civil Engineers (ASCE), ISBN 978-0-7844-1270-1 (paper); ISBN 978-0-7844-7768-7 (pdf).

· Anumba, C. J. and Memari, A. M., (2013). Editors, Proceedings of the AEI 2013 Architectural Engineering National Conference – Building Solutions for Architectural Engineering, April 3-5, 2013, State College, PA, Architectural Engineering Institute, American Society of Civil Engineers, Reston, VA, ISBN 978-0-7844-1290-9, 1029 p.

E. Technical Reports

· Wolfgang, B., Hine, C., Lowe, S., Mirzai, N., Hashemi, M., and Memari, A., (2022). NAIMA Scope: 2021 IECC Additional Efficiency Package Cost Analysis, Submitted to the North American Insulation Manufacturers Association (NAIMA), The Pennsylvania Housing Research Center, Penn State University, 24p.

· Memari, A., Griffin, C., Yi, H., Lowe, S., Mirzai, N., and Hashemi, M., (2022). Thermal, Energy, and Indoor Environment Quality Performance of the PA Hemp House, Report Submitted to DON Services, Inc., The Pennsylvania Housing Research Center, Penn State University, 66p.

· Jellen, A., and Memari, A. M., (2022). “Structural Design of a Cross-Laminated Timber (CLT) Single-Family Home,” Final Report, The Pennsylvania Housing Research Center, Report No. 112, Published February 2022, 241 p.

· Memari, A. M., Bilen, S., Brown, N., Duarte, J. P., Nazarian, S., Radlinska, A., and Xiao, M., “Analyses of concrete samples with ingredients and engineering analysis of concrete 3D printed box shaped housing structure,” Phase 1 Report Submitted to Xtreme Habitat Institute, Sponsor: Alaska Housing Finance Corp., 91 p., May 9, 2021.

· Lu, X. and Memari, A. M., (2018). “Comparison of Innovative Residential Wall Systems Based on Energy Simulation and Life Cycle Assessment,” Final Report, The Pennsylvania Housing Research Center, Submitted September 2018, 41 p.

· Lu, X. and Memari, A. M., (2018). “Evaluation of Thermal Properties of Building Envelope Systems Using Hot Box Test Method,” Final Report, The Pennsylvania Housing Research Center, Submitted May 2018, 40 p.

· Lu, X. and Memari, A. M., (2017). “Performance Evaluation of Wall Panels Incorporating New and Innovative Materials Developed with High Insulation Properties,” Final Report, The Pennsylvania Housing Research Center, Submitted January 2017, 35 p.

· Memari, A. M. and Wolfgang, N. M., (2016). “PHRC Review of NIST NCSTAR 3, Technical Investigation of the May 22, 2011 Tornado in Joplin, Missouri,” Report Submitted to National Association of Home Builders, Construction, Codes and Standards, June 2016, 35 p.

· Memari, A. M. and Wolfgang, B. M., (2016). “PHRC Review of FEMA P-942, Hurricane Study in New Jersey and New York,” Report Submitted to National Association of Home Builders, Construction, Codes and Standards, May 2016, 21 p.

· Kamel, E. and Memari, A. M., (2016). “Energy Retrofit Methods for Building Envelope Systems,” Final Report, The Pennsylvania Housing Research Center, Report Submitted April 2016, 106 p.

· Jellen, A. C., Kamel, E., and Memari, A. M., (2015). “Moisture Management in Homes,” Final Report, The Pennsylvania Housing Research Center, Report Submitted November 2015, 75 p.

· Kamel, E. and Memari, A. M., (2015). “Review of Enclosure and Other Selected Components of Solar Decathlon Competition Projects 2002-2013,” Final Report, The Pennsylvania Housing Research Center, Report Submitted April 2015, 208 p.

· Ariosto, T. M. and Memari, A. M., (2013). Evaluation of the Energy Performance of Glazing Systems and Fenestration Retrofit Solutions, PHRC Research Series Report No. 111, The Pennsylvania Housing Research Center, Penn State University, University Park, PA, December 2013, ISBN 978-1-62307-002-1, 145 p.

· Memari, A. M. and Ariosto, T., (2012). Comparative Study of Glazing Systems Employing Transparent and Translucent Insulation for Building 661, Final Report Submitted to DOE-GPIC-HUB, January 2012, 53 p.

· Memari, A. M., Hartman, K.H., and Kremer, P. A., (2011). Racking Test Evaluation of EN-WALL 7250 Unitized Curtain Wall System with 3M™ VHB™ Structural Glazing Tape, Report Submitted to 3M Industrial Adhesives & Tapes Division, St. Paul, MN, March 2011, 72 P.

· Memari, A. M., O’Brien, W. C., Hartman, K. H., Kremer, P. A., and Behr, R. A., (2011). Architectural Glass Seismic Behavior Fragility Curve Development, Phase I-II Research Report Submitted to Applied Technology Council, Redwood City, CA, March 2011, 432 p.

· Donovan, L.T. and Memari, A. M., (2011). Determination of Seismic Performance Factors for Structural Insulated Panel Shear Walls Based on FEMA P695 Methodology, PHRC Research Series Report No. 110, Pennsylvania Housing Research Center (PHRC) University Park, PA, May 2011, 151 p.

· Terentiuk, S. and Memari, A. M., (2011). Performance of Structural Insulated Panels with Different Fasteners and Splines under Monotonic and Cyclic Loading, PHRC Research Series Report No. 109, Pennsylvania Housing Research Center (PHRC), University Park, PA, May 2011, 301 p.

· Memari, A. M., Iulo, L. D., and Stultz, C.R., (2010). Building Integrated Photovoltaic Systems for Single Family Dwellings -- Efficiency and Innovation Concepts, Report to Bowers Program, Penn State, University Park, PA, June 2010, 53 p.

· Memari, A. M. and Lepage, A. (2010). Structural Analysis and Design of Bolt-A-Blok Wall Systems – Phase I: An Exploratory Study, Phase I Research Report Submitted to Bolt-A-Blok, Inc, Anderson, Indiana, February 2010, 134 p.

· Memari, A. M. and Shoemaker, J. M., (2009). Development of an Analytical Seismic Evaluation Procedure for Building Code Conformance of Battery Racks, Final Research Reports Submitted to EnerSys, Reading, PA, September 2009, A total of 44 Separate Reports Developed for the Project, 1000 p.

· Memari, A. M. and Iulo, L. D., (2009). Structural and Building Technology Evaluation of Some Mass Walls Suitable for Sustainable Design of Residential Construction, Report to Bowers Program, Penn State, University Park, PA, July 2009, 48 p.

· Memari, A. M., Kasal, B., Manbeck, H. B., and Adams, A. R., (2008). Experimental Cyclic Racking Evaluation of Light-frame Wood Stud and Steel Stud Wall Systems, PHRC Research Series Report No. 107, Pennsylvania Housing Research Center, University Park, PA, April 2008, 92 p.

· Memari, A. M., (2008). In-plane Shear Performance of Wood-Frame Wall Systems with Drywall Sheathing Finished with Two Different Types of Joint Compound under Cyclic Racking Loading, Research Report Submitted to CTS Cement Manufacturing Company, Research and Development Laboratories, Los Angeles, CA, January 2008, 35 p.

· Memari, A. M. and Liang, J., (2006). Development of a Multihazard Resistant Panelized Brick Veneer Wall System, Phase I Report Submitted to General Services Administration, San Francisco, CA, May 2006, 247 p.

· Memari, A. M., (2002). Seismic Evaluation of and Recommendation for Superior Walls Foundation Wall Systems for Use in Seismic Regions, PHRC Research Series Report No. 79, Pennsylvania Housing Research Center, University Park, PA, March 2002, 78 p.

· Memari, A.M., Harris, H.G., Hamid, A.A. and Scanlon, A., (2001). Seismic Column Reinforcement Study, Final Report No. FHW-PA 2001-015-96-29 (Vol. 1 & Vol. 2) submitted to Penn DOT, July 2001, Vol. 1, 310 p., Vol. 2, 352 p.

· Memari, A.M., Behr, R.A. and Kremer, P.A., (2001). Dynamic Racking Crescendo Tests on Architectural Glass Fitted with Anchored “PET” Film, Preliminary Test Report submitted to CP Films, Inc., April 2001, 22 p.

· Memari, A. M., Behr, R. A. and Kremer, P. A., (2000). Dynamic Racking Crescendo Tests on Insulating Glass Units Constructed with One Laminated Glass Pane and One Monolithic Glass Pane, Report to SOLUTIA, Inc., Project Sponsor, November 2000, 31 p.

F. Other Articles

· Jellen, A. C. and Memari, A. M., (2016). “Expanding the Use of Modular Construction,” Modular Advantage Magazine, February 2016, pp. 37-40.

· Chung, C., Lou, J. J., Memari, A. M., and Ting, R., (2007). “Testing Curtain Wall Durability – A New Perspective on Mock-ups,” The Construction Specifier, January 2007, pp. 70-79.

· Memari, A. M., (2005). “On the Challenge of Designing Building Envelope for Seismic Loads,” AEI/CI Quarterly Online Magazine: Means, Methods, and Trends, Summer 2005, http://www.mmtmagazine.org/archives/summer05.html, pp. 1-9.

· Koffel, W. E., Memari, A. M., Rittenhouse, T., Dawson, H., and Ettouney, M., (2005). “Curtainwalls in Modern Buildings,” Structures Magazine, January 2005, pp. 32-35.

G. Workshop and Other Presentations

· Memari, A. M., (2020). “Application of 3D printing in Transportation Structures,” Transportation Research Board (TRB) committee, AFH40 Construction of Bridges and Structures, January 12, 2020, Washington, DC.

· Memari, A. M. (2018). “3D Printing of Concrete – Status, Challenges, and Opportunities,” Invited Speaker at 2018 Portland Cement Association (PCA) Summer Committee Meeting, Chicago, IL, August 28-29, 2018.

· Memari, A. M. (2018). “A Review of 3D Printing of Concrete and Challenges for Construction,” Invited Plenary Lecture at 2018 Portland Cement Association (PCA) Professors’ Workshop, Skokie, IL, July 23-27, 2018.

· Memari, A. M., (2017). “Learning from the Performance of Residential Construction in the aftermath of Hurricanes Harvey and Irma,” PBA Fall Board Meeting, Hershey, PA, October 27, 2017.

· Memari, A. M. and Ariosto, T. “Comparative Study of Energy Performance of Different Glazing Systems,” Workshop on Resiliency of the National Building Inventory: Creating a Roadmap for the Future, The University of Southern California, Los Angeles, CA, September 13-14, 2011.

· Memari, A. M., “Overview of Recent Experimental Research on Various Types of Building Envelope Wall Systems and Introduction of a Transparent Sustainable Wall System with BIPV Glazing,” CHiPBS Spring 2011 Workshop, April 7-9, 2011, University Park, PA.

· Memari, A. M., “Understanding Seismic Behavior of Architectural Glass Curtain Wall and Storefront Systems Based on Full-Scale Laboratory Tests,” Workshop on the Design of Modern Glazing Systems, AEI 2011 Conference, Oakland, CA, March 30-April 2, 2011.

· Memari, A. M. and Standley, J. A., “Transparent Sustainable Photo-Voltaic Integrated Wall System for Residential Construction,” Energy and Advanced Materials Innovation Workshop, State College, PA, October 20-21, 2009.